CRUSHING - screening - Separating - SORTING

CRUSHING - screening - Separating - SORTING

CityEquip is part of Christophel GmbH in Germany.

Successfully established in the compact systems sector, it offers an ideal expansion for KUHN Schweiz AG in the areas of crushing - screening - separating - sorting.

Crushing

CitySkid 7X3 und 7X4Whether in the hard rock of Scandinavia or in recycling in Portugal: CitySkid is impressive due to its simple, sturdy design. Only four electric motors are needed in order to get the machine operational with a few minutes of set-up. The machine easily performs its task. The system operator is also grateful, if material is drawn in that is too large to be crushed, it is safely transported away. In case of a problem, the CitySkid provides the best accessibility to critical points. The discharge direction of the moving rocker and the discharge belt run in the same direction, which is advantageous for the discharge of iron. “Avoid buying and servicing the diesel motor,” according to the slogan for the 7X3, if there is an external current supply.

CityTrak 7TX

Based on the CitySkid, the CityTrak 7TX, with mobile-chain, is noted for its simple, sturdy design.

 

Only four electric motors and the hydraulic drive for the chain drive are needed in order to get the machine operational with a few minutes of set-up. The CityTrak 7TK easily performs its task. The system operator is also grateful, if material is drawn in that is too large to be crushed, it is safely transported away. In the event of a problem, CityTrak 7TX provides the best access to critical locations and a platform comes standard on the side of the crusher intake.

 

The moving rocker and the discharge belt run concurrently in the same discharge direction, which is advantageous for the discharge of iron. Additional electrical consumers can be connected flexibly via two outlets. Of course, the CityTrak 7TX can optionally simply be connected to an external supply. The crushing operation can be run without a person to save money by using a standard issue light barrier control.

CityTrak 9TX

Based on years of experience with the CityEquip series, the mobile-chain CityTrak 9TX provides service with it simple, sturdy design. Only four electric motors and the hydraulic drive for the chain drive are needed in order to get the machine operational with a few minutes of set-up.

 

The CityTrak 9TK performs its service simply and thankfully. The system operator is also grateful, if material is drawn in that is too large to be crushed, it is safely transported away. In the event of a problem, CityTrak 9TX provides the best access to critical locations and a platform comes standard on the side of the crusher intake.  Stops due to unbreakable goods are generally easily resolved by a simple, mechanical gap adjustment using wedges.

 

The moving rocker and the discharge belt run concurrently in the same discharge direction, which is advantageous for the discharge of iron. Of course, the CityTrak 9TX can optionally simply be connected to an external supply. The crushing operation can be run without a person to save money by using a standard issue light barrier control.

Operators can confirm an annual average performance of 100 t/h

CitySkid 9V3 und 9V4

With this crusher jaw, pieces up to 250 mm can be crushed into the finest pieces with low wear.

This makes investment decisions difficult: Low annual tonnages of rough and hard stone types versus the requirements for a mobile crusher. In many applications, the better crushing system of the crusher jaw has already proven itself. The CitySkid 9V4 used for subsequent smaller crushing only has a feed depth of 250 mm. This ensures uniform jaw wear and guarantees a staggered grain size with top grain shape. The high performance is provided by the large jaw width of 920 mm. The grain is crushed again on the entire jaw length before it falls through the narrow gap. The CitySkid 9V4 is used with a container wagon or flatbed trailer.

Screening

CitySkreen 920

Compact and convenient screening!

The simple, well thought out design makes the CitySkreen 920 a profitable rescreening system when cost-effective rescreening is needed downstream of existing crushing or screening equipment. No feed hopper, diesel motor and waste belts are needed. The large portion of finished product is simply dumped up to a maximum height. Obviously, the low portion of oversized grain is dumped from the wheel loader or, if necessary, carried to the side by the on-board waste belt. The CitySkreen 920 reaches its place of use on a container wagon or flatbed trailer. “0" set-up times excite owners and operators. As CitySkreen 920-1 with simple oversized grain removal or as CitySkreen 920-2 with on-board oversize grain belt: Lowest operating and wear cost are ensured with maximum use and ensures the competitiveness of satisfied CitySkreen operators.

CityTrommel 518

CityTrommel 518 reliably and consistently separates waste, compost, slag or minerals. The screening occurs directly from the ongoing production process.

Drum screener tumbles the screening goods. The mechanical demand and the permanent impacts on the screen cause the necessary clean separation. The CityTrommel 518 is preferably used with ongoing operations. Using costly feed hoppers and complicated drive equipment is deliberately dispensed with. The goal when using a CityTrommel is clean separation with low investment and the use of simple, sturdy equipment.

Separating

AirCrawler 1200 und AirCrawler 1600

Add value, improve quality or fulfil stricter legal regulations: Mobile air separation is achieved with the mobile-chain AirCrawler.

Minerals, waste, slag and wood are uniformly cleared of impurities. Uniform distribution of material on the 1,200 or 1,600 mm wide supply belt is important. Depending on the grain size, the weight difference and the humidity, the supply belt is adjusted according to the height and distance to the drum. The air volume is regulated and like magic, light and heavy material is separated. The observation window allows you to check the material behaviour. Amazing the value added from wind separation. Impurities and high costs are now a thing of the past.

AirMaster 1200 und AirMaster 1600

Add value, improve quality or fulfil stricter legal regulations: Mobile air separation is achieved with the mobile-container AirMaster.

Minerals, waste, slag and wood are uniformly cleared of impurities. Uniform distribution of material on the 1,200 or 1,600 mm wide supply belt is important. Depending on the grain size, the weight difference and the humidity, the supply belt is adjusted according to the height and distance to the drum. The air volume is regulated and like magic, light and heavy material is separated. The observation window allows you to check the material behaviour. Amazing the value added from wind separation. Impurities and high costs are now a thing of the past.

HydroMaster 1000
Separation through specific density difference in the water bath.

The mobile-container HydroMaster 1000 reliably separates through precise use of the specific density difference. Just the water loss is automatically adjusted via the wetted surface by removing the sales product. There is no need to process waste water.

Nothing separates as reliably and as precisely as the specific density difference. If the separation is at 1t/m³, the HydroMaster 1000 has unparalleled precision. Wood, plastics as well as pumice and other light structure materials are cleanly separated. The low space and kW demand allow for economical separation of grain sizes up to ≤60 mm in a small space. The automatic control and non-human operation reduce the expense to power supply, water supply and the “GO”. Up to 130 t feed material is cleanly separated per hour. Quality complaints and landfill costs are replaced with clean sales fractions and yields. Winter is outwitted with heating and time switch.

Sorting

CitySort Ne 1000/1500

The discharge chute takes over the feed material, distributes it and leads to the non-ferrous separator. Optionally, the chute can be configured with stainless steel and equipped with a magnetic longitudinal discharge for iron separation. Main material throughput and the non-ferrous products are extracted via on-board waste belts.

Minerals, waste, slag and wood frequently contain metallic portions. The inevitable development of a modern industrial society highlights the need to exploit the impact of the product as a “raw material storage” and as a source of revenue. The explosion of raw material prices in 2007 and 2008 made the impacts on the limited resources on consumer prices clear. Alternating usage sites, limited space requirements and small individual batches complicated the entry into necessary metal recycling. The mobile-container CitySort program offers flexible solutions for these tasks.